Alinking UNC-9512 Uživatelský manuál Strana 83

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 89
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 82
Warning! The alarm will be triggered when
alarm pin 3 & 4 are formed as a short circuit.
Please do not connect the electric voltage or
current into alarm input pin because the
electronic current might burn the product.
Pin 4
Pin 3
Warning! The alarm will be triggered when
alarm pin 3 & 5 are formed as a short circuit.
Please do not connect the electric voltage or
current into alarm input pin because the
electronic current might burn the product.
Pin 5
Warning!
Where connecting of a low or high current loop to the external alarm input/output of
the product is required, the wiring and connection shall be conducted by a qualified
electrician. Incorrect wiring may bring about damage to the product fatal electric
shock.
Direct connection of the external alarm input/output terminal to high-current
equipment is not allowed and a customized repeat circuit might be required (provided
by the customer) for some cases to isolate the terminal and the high-current
equipment. Where the voltage/current of an external device exceeds the loading
capability (5V) of the Alarm I/O, the product would be damaged seriously.
83
Zobrazit stránku 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 89

Komentáře k této Příručce

Žádné komentáře